Services

Paint and Corrosion Stripping

Running at pressures up to 3000 bar (40,000 psi) and utilising heads with multiple nozzles, the waterjetting process is a highly effective industrial paint stripper, non-abrasive method for surface preparation.

Differing from other paint stripping services by being a wet process, there is no dust and waste material can be easily contained, vacuumed or pumped away.

Coatings manufacturers specify that minimal chlorides are left entrapped in the substrate – a common problem with abrasive blasting. Water jetting, by its very nature minimises this issue by rinsing the surface with clean potable water.

Aquamax strips paint from aircraft, ferries, oil platforms, buildings, concrete - all throughout New Zealand.

Swimming Pool Paint Stripping

Water jetting is an excellent process for commercial paint stripper needs, from simply stripping paint to plaster and scabbling the substrate in preparation for plastering or tiling.

paint-corrosion-img
paint-corrosion-img-2
paint-corrosion-img-3
paint-corrosion-img-4
paint-corrosion-img-5

Contact us to make a booking. Call Now 0800 AQUAMAX (278 2629)

Paint and Corrosion Stripping

Case Studies

Fletcher Cresco

Wanganui Aeroworks

Wanganui Aeroworks, a company which specialised in all aspects of aerial applications such as fertiliser spreading and agriculture spraying, required removal of filiform corrosion and ceramic undercarriage coatings on an Ag-Aircraft.

  • No distortion to any surfaces
  • All rivets cleaned of edgeline coatings and oxides
  • Small amounts of water used easily contained and disposed of
Construction

Related Services

Hydrodemolition

Hydrodemolition is the process of removing hardened concrete, using ultra-high-pressure water jetting which water does not damage the surrounding concrete or steel.

Robotic Hydrodemolition

Our newly acquired Aquacutter robot delivers state-of-the-art hydrodemolition capability. Robots enable several significant improvements over hand gunning.

Scabbling

Water jetting is an ideal scabbling tool for creating construction joints or decorative finishes.

Concrete Stencilling and Etching

Aquamax uses precision water jetting equipment without chemicals or abrasives to achieve a wide range of concrete finishes.

Drain Cleaning and CCTV Surveying

Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua.

Concrete Stripping / Cleaning

Our unique process is ideal for stripping paint from concrete and concrete block walls and floors.

Aggregate Exposure

Our process can produce or repair an exposed aggregate finish on hardened concrete.

Hydro Excavation

The low-risk way to dig, we are pleased to introduce our new state-of-the-art hydro excavator.

Our Clients Are Saying
Downer-img

"Aquamax have produced very well in terms of outputs onsite and have done so in a safe and professional manner"

– Phil Owen, Project Engineer, Downer

"Aquamax have produced very well in terms of outputs onsite and have done so in a safe and professional manner"

– Phil Owen, Project Engineer, Downer
Our Clients
Downer logo
Contech logo
Hawkins logo
Fletcher logo
Naylor Love logo
Aquamax-logo

Specialists in surface preparation, hydrodemolition and water blasting services.

0800 AQUAMAX (278 2629)
sales@aquamax.co.nz

Auckland Depot & Office

114 Rockfield Road, Penrose
PO Box 11322, Ellerslie
Auckland 1542

Wellington Depot

24B Peterkin St, Wingate
Lower Hutt 5019